双轴双数控全自动切条机

CJ-170SQ-2 双轴双数控全自动切条机

 

CJ-170SQ-2 Two-axis Double-NC Automatic Slitting Machine

 

适用范围：

 

application:

 

双轴双数控全自动切条机及直纹,45度斜纹卷布机适用于各种布料、无纺布、帐篷、雨伞布、泡棉、皮革、反光材料、塑胶、纸张、双面胶、绝缘胶布、醋酸布、补强带、导电布、铜箔等材料各种宽度直条，横条及45度直斜条的双轴同时裁切。本机是服装、箱包、鞋帽、服装辅料、反光材料厂、帐篷厂、雨伞厂、胶布厂、电子厂等行业的理想选择。

 

Two-axis double-NC automatic sliver machine and straight line, 45 degree twill coil machine is suitable for cutting all kinds of fabric, non-woven fabric, tent, umbrella cloth, foam cotton, leather, reflective material, plastic, paper, double-sided adhesive, insulating rubber cloth, acetic acid cloth, reinforcing tape, conductive cloth, copper foil and other materials at the same time. This machine is an ideal choice for clothing, bags, shoes and hats, garment accessories, reflective materials factory, tent factory, umbrella factory, rubber cloth factory, electronic factory and other industries.

 

技术参数： Technical parameters:
布料幅宽： Fabric width:	1.7米(另有2.05米、2.4米、2.8米可选) 1.7 m (optional 2.05 m, 2.4 m, 2.8 m)	布料转速： Cloth speed:	0-800(转/分钟) 0-800 (rev/min)
切布直径： Cloth diameter:	200毫米，也可定制400毫米 200 mm or be customized to 400 mm	最小切条宽度： Minimum slice width:	2毫米 2 mm
刀片直径： Blade diameter:	250毫米（也可定制到450毫米） 250 mm or be customized to 450 mm	刀片电机功率：Blade motor power:	4千瓦 4 kw
布轴直径： Shaft diameter:	37毫米（可定制） 37mm (customizable)	布料电机功率：Distribution motor power:	4千瓦 4 kw
外形尺寸： size:	2.8米x1.5米x1.7米 2.8 m x 1.7m x 1.7 m	电压： Voltage:	380V/220V可选 380V/220V optional

 

配备特点：

Feature:

1、 两支布料主轴以及两把圆刀均使用无级变频调速系统，可做高低无级调速及正反转切换控制。

1. Stepless frequency conversion speed regulation system is used for two spindles and three circular knives, which can be used for stepless speed regulation and forward and reverse switching control.

2、 两支布料主轴同时转动，两把圆刀同时进刀裁切，效率是单轴切条机的两倍，并可省人工2名。

2. Two cloth spindles rotate at the same time, two circular knives feed and cut at the same time, the efficiency is three times that of the single-axis sliver, and can save two people.

3、 两把圆刀配有冷刀装置，不粘刀。两个刀座可独立调节位置，不同直径的刀片可同时使用。

3. two round knives are equipped with a cold knife device, which does not stick to the knife. Two tool holders can independently adjust position, and blades of different diameters can be used at the same time.

4、 台板左右移位和进退刀均采用进口高精密步进系统及进口PLC控制切割宽度及进退刀切割和磨刀系统，配合进口精密滚珠丝杆及滑轨移位，高寿命，不易磨损，使切割宽度的精度达到0.1mm，最窄切割宽度为2mm，两个刀片同时进刀切割时平行快速推进，速度采用无极调速，可分段控制，纸管容易切断，达到高精度快速切出高品质的产品。

4. Imported high precision stepping system and imported PLC are used to control the cutting width and the cutting and grinding system of the advance and retreat cutters. With imported precision ball screw and slideway shifting, the precision of the cutting width is 0.1 mm, the narrowest cutting width is 2 mm, and the two blades advance parallel and fast while cutting at the same time, and the speed is infinite. Speed regulation, segmented control, easy to cut off the paper tube, to achieve high precision and rapid cutting out of high quality products.

5、 操作界面采用德国西门子高精度电脑触摸屏，所有操作，只需要一个画面，可同时设定六种分切宽度和次数，并显示实际切割次数，并设有手动/自动转换转换功能。

5. The operation interface adopts Siemens high-precision computer touch screen. All operations require only one screen. Six cutting widths and times can be set simultaneously, and the actual cutting times can be displayed. The manual/automatic conversion function is also provided.

6、 在手动功能下，设有十字摇杆手柄，操作更加人性化！更加便捷，移动速度更快，移动的同时，可以在触摸屏上显示移动的宽度，达到更加精准。

6. Under the manual function, there is a cross rocker handle, which makes the operation more human-oriented! More convenient, faster moving speed, moving at the same time, can display the width of the movement on the touch screen, to achieve more accurate.

7、 采用气缸快速放料设计，快速一步到位，夹紧不松动。上料下料只须一个动作即可完成。

7. Adopt the design of quick discharge of cylinder, quick one-step in place, no loose clamping. Feeding and cutting can be accomplished in only one action.

8、 电路采用各个独立控制系统，每条线都做有标号，可自动诊断机器故障问题，维修简单快捷，不易出故障。

8. Each independent control system is adopted in the circuit. Each line is labeled. It can diagnose machine fault automatically. The maintenance is simple and fast, and it is not easy to break down.

9、 夹布卡盘配有安全防护罩，不伤人。电线配有工程塑料链条保护，电线不容易折断，不容易老化。

9. Cloth chuck is equipped with a safety shield, which does not hurt people. Wire is equipped with engineering plastic chain protection, wire is not easy to break, not easy to aging.